Page of 72

Advertisement

R
C
USA

Advertisement

   Related Manuals for GE GXSF30V

   Summary of Contents for GE GXSF30V

  • Page 8: Installation Requirements

    22-7/16" 3-3/8" 14-7/16" TOP VIEW IN - OUT 43-1/4" 37" SIDE VIEW FRONT VIEW...

  • Page 15: Programming Water Softener, Set Time Of Day

    Salt Level Clock Hardness Recharge...

  • Page 16: Set Water Hardness Number, Set Starting Time

    Salt Level Clock Hardness Recharge 20 gpg hardness 2 ppm iron x 5 = 10 +10 (times) 30 HARDNESS NUMBER Salt Level Clock Hardness Recharge...

  • Page 17

    Salt Level Clock Hardness Recharge Salt Level Clock Hardness Recharge Days to Empty Days to Empty...

  • Page 19

    Call for Service...

  • Page 26

    Call for Service...

  • Page 29

    Wear Strip Seal Cross-section View...

  • Page 34

    Water Treatment Device Trademark/Model Designation GXSF30V Manufacturer: General Electric Company The water treatment device(s) listed on this certificate have met the testing requirements pursuant to Section 116830 of the Health and Safety Code for the following health related contaminants: Microbiological Contaminants and Turbidity Organic Contaminants Rated Service Capacity: Conditions of Certification:...

  • Page 44

    22-7/16" NTRADA -3/8" 14-7/16" SALIDA VISTA SUPERIOR O- AFUERA 43-1/4" 37" VISTA LATERAL VISTA FRONTAL...

  • Page 51

    Salt Level Clock Hardness Recharge...

  • Page 52

    Salt Level Clock Hardness Recharge 20 gpg hardness 2 ppm iron x 5 = 10 +10 (times) 30 HARDNESS NUMBER Salt Level Clock Hardness Recharge...

  • Page 53

    Salt Level Clock Hardness Recharge Salt Level Clock Hardness Recharge Days to Empty Days to Empty...

  • Page 55

    Call for Service...

  • Page 62

    Call for Service...

  • Page 65

    Wear Strip Seal Cross-section View...

  • Page 70

    Water Treatment Device Trademark/Model Designation GXSF30V Manufacturer: General Electric Company The water treatment device(s) listed on this certificate have met the testing requirements pursuant to Section 116830 of the Health and Safety Code for the following health related contaminants: Microbiological Contaminants and Turbidity Organic Contaminants Rated Service Capacity: Conditions of Certification:...

Comments to this Manuals

Symbols: 0
Latest comments:
  • Charles Asselin May 25, 2015 12:59:
    how many gallon of water is discharge when it is in recycling mode of 104 minutes
  • Randy Nov 27, 2012 02:59:
    After I installed this softener and did a recharge, water was coming out of the overflow. I discovered the float valve was at the top of the float stem. No where in this manual does it say where the float should be on the stem. this is a defect in the manual.