Brother P-touch 1400 User Manual page 48

Appendix
i
Problem ' Solution
_D Tile display stays blank after you
have turned on the machine.
Check that the AC adapter
(model AD-60) is connected
correctly.
If you are using batteries, check
that they am correctly inserted.
If the batteries are low, replace
them with new ones.
Check that the back cover has
been properly attached.
If the tape cassette is empty,
replace it with a new one.
If the batteries are low, replace
them with new ones.
O The machine does not print or the
printed characters are blurred.
The text files that you stored in
the memory are no longer there.
If you are using batteries, they
The printed characters are not may have a low charge. Try using
formed properly, the AC adapter or replace the
batteries with new ones.
Clean the print head as explained
A blank horizontal line appears on Cleaning the prillt head,
through the printed label, rol!(,rs and tap(, cutter on page 7.
Yon have reached the end of the
Striped tape appears, tape. Replace the tape cassette
with a new one.
The P-touch has "locked up" (i.e.,
nothing happens when a key is
pressed).
Turn off the P-touch, and then
while holding down @ and
[_, tnrn the machine back on.
The machine will restore, but the
text and formats shown in the
display and all text files stored in
the memory are erased.
40