Brother P-touch 1400 User Manual page 17

Label Type Modes
i
Pressing @ allows you to select one of the two regnlar modes for designing and printing
your own custom labels, or any of the six special modes available for printing labels pre-
formatted for identifying patch panels, cables, connectors and other components.
O Press
@ Press _'_'° or @ (or continue pressing _)until the desired mode is
displayed. (For details on each Label Type mode, refer to the sections below.)
Press _ to apply the selected Label Type mode.
• If NORMAL or VERTICAL was selected, continue entering the label text as
described in chapter 3, Basi_ Fu_ctions.
• If ROTATE, ROT-REP, PORT, PANEL, or FLAG was selected, continue
with the following steps.
€_ Press <_ or {_ until the desired parameter is displayed.
Press (_'"° or _ until the desired setting is displayed (or use the number keys
to type in the desired setting).
Press _ to apply the selected settings.
Type the text for each label in a separate text block.
Print the labels.
• To print a single copy of each label, press @.
• To print multiple copies or several copies while increasing certain characters, or to
print using any other special printing function, press (_), then _ and choose
yo_r opt o _s (For deta s, refer to {/s'il g _pe_ial pdntil g.fimctiol s'o 1 page 31.)
Labels printed using the Normal and Vertical Label Type
modes can be formatted and printed to fit any need.
NORMAL
ABCDE ]
VERTI(AL
< mo c::)t..u]