Brother P-touch 1400 User Manual page 27

Entering bar code data
O Press _'.
Type in the new bar code data or edit the old data.
O Press _ to add the bar code to the text.
_.- To add special characters to the bar code data (only with protocols CODE39,
CODABAR. EAN128 or CODE128), position the cursor below the chm'acter
i_panediately to the right of where you wish to add the special character, and then
Accont Home D_d
press @. Press d_ or q_ until the desired special character is displayed, and
Rew Nod
then press (_ to acid the character to the data. ,Refer to the tables below for a list
of the special characters that are available.
_,' To change the data or WIDTH or UNDER# parameter settings of a bar code that has
already been added to the text, position the cursor below the bar code mark ( III I II ) , and
then press (_, then 1_.
The following special characters can only be added to bar codes created using protocol
CODE39 or CODABAR
CODE39
Symbol Character Symbol Character Symbol
0 4 / 0
1 5 + 1
2 (SPACE) 6 % 2
$
CODABAR
Charader Symbol
3
$ 4
: 5
Character
/
19