Brother P-touch 1400 User Manual page 46

_[_ Press G_), then D.
O Press <_ o1" {_ until CONTRAST is displayed.
Press _mo or _ until the desired setting is displayed, and the,, press _.
Setting the Auto Reduction function
With the Auto Reduction function, you can select whether the text width (TEXT
WIDTH) or the text size (TEXT SIZE) will be reduced if text that is set to the AUTO
Size setting is too large for the specified label length. (The default setting is TEXT
SIZE.)
_[_ Press @,
then
_.
OPress or "
{_ until AUTO REDUCTION Is displayed.
Press _mo or _ until tile desired setting is displayed, and then press _.
If TEXT SIZE is selecled and more text is added, the character size is
reduced so the lexl fits within the specified label length.
ABCDE ABCDEFGH
If TEXT WIDTH is selecled and more text is added, the character width is
reduced so the lexl fits wilhin Ihe specified label length.
However. after Ihe character widlh is reduced to MINIMUM. the character
size will be reduced so the lext fils within the specified label lenglh.
ABCDE ABCDEFGH
Calibrating the label length
If the length of the printed label does not corres_md to tile length specified with the
Length flmction, the printed label length can be recalibrated with the Length Ac!iust
function by selecting a setting between -1 and +3. (The default setting is 0.)
0 Press (5_, then _.
O Press <_ or _
{_ until LENGTH ADJUST is displayed.
O Press _mo or _ until the desired setting is displayed, and the,, press _.
38