Brother P-touch 1400 User Manual page 26

_._: To type in _muppercase accented character, press _ (or press @, then _ tO
enter Caps mode)before pressing tbe letter key.
_,_ An accented character c_ also be ,selected bY typing in the corresponding code flom
NewSl_k
the table above. For example, typing "A2"; then pressing _ adds "N" to the text.
Entering a bar code
The Bar Code fnnction allows bar codes to be printed as part of labels.
_,_ Since this machine is not Specifically designed for Special bar code labeMimking,
some bar code readers may not be able to read the labels.
_* Bar Code readers may not be able to read bar codes printed with certain ink colors on
certain label tape colors. For best results, print barcode labels in black on white tap e .
In addition, the various bar code parameters enable you to create more customized bar
codes.
Parameter " Settings
CODE 39, I-2/5, EANI3, EAN8, UPC-A,
PROTOCOL UPC-E, CODABAR, EANI2K CODEI28
WIDTH
(bar width) MEDII_I, SMALL, LARGE
UNDER# ON, OFF
(numbers printed below bar code)
CHE(N DIGIT OFF, ON
i_'" The CItECK DIGIT parmleter is on!y aYai!aNe with th e CODE 39,' !'2/5 _d
CODABAR protoc_)ls.
Setting bar code parameters
O Press G_), then _'.
Press <_ or [_ until the parameter that you wish to change is displayed.
_} Press _mo or q_P until the desired setting is displayed.
{[} Repeat steps _ and _ until all parameters are set as you wish.
_ Press _.
18