Air Conditioner - GE AJCH Series Owner's Manual

The
controls
on yOttr
air
conditioner
TEMP CONTROLS MODE CONTROLS
LOW
FAN
HIGH
• FAN
LOW •
HEAT
HIGH ii I HIGIt
HEAT
You_ model will look like orte oJ'lhese.
_(_iiii(_ii i I
A
TempControl
The temp control is used to maintain the
room temperature. The compressor will cycle
on and offto keep the room at the same level
of comfbrt. When you turn the knob to COOLER
(blue) the indoor air will become cooler. Turn
the knob to WARMER (red) and the indoor air
will become warmer.
HEAT PUMP MODELS
When the outdoor temperature is lower than
25°F., heat is provided by the electric heater in
the air conditioner instead of by the heat pump.
A Mode Control
HIGH COOL and LOW COOL provide cooling with
different tim speeds.
HIGH HEATand LOW HEATprovide heating with
diLL(rent fan speeds.
LOW FAN or HIGH FAN provides air circulation
and filtering without cooling or heating.
NOTE:
If you move the switch from a cool or heat setting
to OFFor to a fan setting, wait at least 3 minutes
before switching hacR to a cool or heat setting.
A 3-minute delay is automatically provided on the
Heat/Cool and Heat Pump models.