Window Requirements; Prepare The Air Conditioner - GE AHEL06BB Owner's Manual

Installation Instructions

1. WINDOW REQUIREMENTS

• These instructions are for a standard
double-hung window. You will need to modify
them for other types of windows.
• The air conditioner can be installed without the
side curtain panels if needed to fit in a narrow
window. See the window opening dimensions.
• All supporting parts must be secured to firm
wood, masonry or metal.
• The electrical outlet must be within reach of
the power cord.
• Follow the dimensions in the table and
illustration for your model.
26-1/16"- 39-1/4"
(With side curtain panels)
2. STORM WINDOW REQUIREMENTS
A storm window frame will not allow the air
conditioner to tilt toward the outside, and will
keep it from draining properly. To adjust for this,
attach a piece of wood to the sill.
WOOD PIECES
WIDTH: 2
LENGTH: Long enough to fit inside the window
frame.
THICKNESS: To determine the thickness, place
than the top of the storm window frame or the
vinyl frame.
Attach securely with nails or screws provided by
the installer.
than storm
window
frame
Storm window
frame
12
13 3/8"
than vinyl frame
(on some windows)
Wood
Sill
Vinyl frame

3. PREPARE THE AIR CONDITIONER

A. Install the top mounting rail with 4 Type A screws
Top Mounting rail
B. Slide the side curtain panels into the side panel
rails.
C. For model AHD06, cut and apply a weather
strip to side of the curtain frame (one each side).
D. Slide left and right side curtain frames into top
and bottom rails. Make sure that side curtains
snap into side of the frames.
CLICK
49-5000633 Rev.1