GE AJCH Series Owner's Manual page 10

I Remove the locking plate on the front left side.
plate- _ _"
4 Reinstall the locking plate xdth the tab behind
the wall case flange. Tighten tt_e screw.
5 Attach tt_e power cord to the base pan with
the clamp.
Clamp
2 Remove the shipping pad inside the air
conditioner next to the compressor.
Shipping pad
3 Careflflly
slide the air condiuoner back into
the case. Make sure that the robing on the unit
does not touch the wall case and that the case
6 When the wall outlet is to the left, extend the
cord under the unit and hold it in place with
the clamp.
_ Clam_OWer cord
7 Attach the fl'ont grille. An opening for the
power cord is on the bottom of the fl'ont grille.
installation is secure.
I0