User Interface And Controls - Salus ST620 Instruction Manual

Salus ST620 Manual 140x140 Finish:Layout 1

USER INTERFACE AND CONTROLS

The status and operation of the ST620 is clearly
shown on the large backlit Liquid Crystal Display (LCD).
This display allows the user to see at a glance the current
status of the heating system, as well as a clear indication
of the current room temperature.
The display consists of a combination of symbols and alphanumeric displays. The top row is a time
and day of the week indicator, the centre row is used to indicate temperature (in Celsius), and the
bottom row is an alphanumeric display for menu and status messages. The symbols around the outside
of the display are status indicators – an explanation of what these indicators mean is shown below.
Indicator Description
Clock Display
Temperature indicator
Alphanumeric Display
Programme Number
indicator
Heat Mode indicator
Holiday indicator
Battery Status
RF Signal indicator
(not used on ST620)
RCC indicator
Service indicator
Frost Mode indicator
Touch Lock indicator
There are few user controls for the ST620, making the programmable thermostat very easy to operate.
The controls are a Touch Ring (which surrounds the user display), two touch sensitive buttons, a reset
button and a slide operated switch mounted on the side of the thermostat.
8
29/4/10 13:11
Function
Displays the day and time
Displays set or measured temperature
Displays menu and other status messages
Displays the number of the
active (selected) programme
Indicates heating output is turned on.
Indicates Holiday operation mode is selected
Indicates battery is low
Indicates the unit is transmitting
a wireless signal
Indicates the status of the Radio Controlled Clock
Indicates Service function is active
Indicates frost setting is turned on
Indicates touch lock is activated
ST620 INSTRUCTION MANUAL
Page 8