Preparation; Filter Installation - Sharp Plasmacluster FP-A40C Operation Manual

PREPARATION

FILTER INSTALLATION

on
To maintain the quality of the filters, they are installed in the main unit and packed in
plastic bags. Be sure to remove the filters from the plastic bags before using the unit.
1
Remove the filters
1
Remove the Back Panel.
Pull the tab at the top of the Back Panel.
2
Remove the Deodorizing filter (black)
and HEPA filter (white) from the plas-
tic bags.
2
Install the filters
1
Place the HEPA filter and Deodorizing filter within the
main unit.
Do not install the HEPA filter backwards or the unit will not operate
properly.
FP-A40U-E.indd 10
Be sure to remove the power plug from the wall outlet.
Deodorizing filter (black)
E-0
Tab
HEPA filter (white)
11.4.6 0:05:39 PM