Basic Assembly Principles; Before You Assemble - Nautilus Be strong NS 200X Assembly Manual

BaSic aSSeMBly PriNciPleS

Here are a few basic tips that will aid in the assembly of the Nautilus® NS200X. By using these
principles, you can simplify each process and save yourself extra time and effort.
1. To make the assembly process go faster, gather the pieces you need for each step and
thoroughly read the assembly instructions for that step prior to starting assembly for the step.
2. When tightening a locknut on a bolt, use a combination wrench to grip the locknut and ensure
that it is fastened securely.
3. When attaching two pieces, gently lift and look through the bolt holes to help guide the bolt
through the holes.
4. As a general rule, and for all bolts and nuts on your NS200X Home Gym, turn bolts or nuts
toward the right to tighten and left to loosen. Or you can remember the mnemonic: "Righty
tighty, lefty loosey."

Before you aSSeMBle

• At least 2 persons reccomended for assembly and installation.
Familiarize yourself with the illustrations to understand what the assembled NS200X will look like.
Select where you are going to locate your NS200X carefully. Assemble your NS200X in the location
and position where you intend to use it.
the NS200X and 36 inches (.91 meters) behind your
can be closer to the wall during use but it is difficult to move after assembly and some room is needed
during assembly.
BEFOrE YOu ASSEmBLE
You will need at least 36 inches (.91 meters) on each side of
NS200X during assembly. The rear of the NS200X
Nautilus NS00X