Parts Name; Display; Fix The Operation Cover By Screw - Sharp Plasmacluster IG-A20U Operation Manual

PARTS NAME

Power cord
Plug

DISPLAY

FIX THE OPERATION COVER BY SCREW

If necessary, operation cover can be fi xed by accessory screw.
washer
screw
Louvers
(Air outlet of Plasmacluster Ions)
High density Plasmacluster Ions are discharged
forward. (Do not put anything in front of the unit.)
Plasmacluster Ion Generating Unit
(Inside)
Please open the cover only when cleaning or
replacing the Plasmacluster Ion Generating Unit.
(See page E-13)
Filter(Air Intake)
* Be sure to clean the fi lter when the fi lter clean
reminder illuminates
* Do not block the air intake or do not push
anything into the unit.
FILTER CLEAN Light
UNIT REPLACEMENT Light
HIGH Light
(blue)
MED. Light
(blue)
LOW Light
(blue)
OPERATION Button
UNIT RESET Button
Use this button when replacing
Plasmacluster Ion Generating Unit.
Don't press it for any other purposes.
FILTER RESET Button
After cleaning the fi lter, plug the power cord and
press the FILTER RESET button for 3 seconds.
AUTO RESTART Switch
rubber cover
E-7
(YELLOW)
(red)