Changing Setting Of Demonstration - Hitachi DZ-MV1000E Instruction Manual

Changing Setting of Demonstration

This DVD video camera/recorder is equipped with a demonstration function.
The default at purchase time is "Auto", which will automatically start the demonstration approx. three
minutes after the DVD video camera/recorder is turned on.
Use the following procedure if you wish to view the demonstration immediately or change the setting to
"Off".
1
Press the MENU button.
2
Choose "Initial Setup",
"Demo Mode", and then
press the A button.
3
Use the joystick to
choose the desired
option, and then press
the A button.
Auto: To start demonstration approx. 3
minutes after turning the DVD video
camera/recorder on.
Off: To set demonstration to off.
Start: To start demonstration immediately.
Press the MENU button again: The menu screen
will disappear.
To stop the demonstration midway, press the C
button.
The demo mode will end when the DVD video
camera/recorder is turned off or the DISC
EJECT button is pressed down.
Note
•
I n i t i a l S e t u p
Beep
•
Power Save
Re c o r d LED
L a n g u a g e A u t o
Demo Mode
O f f
R e s e t S t a r t
ENTER RETURN RAM
•
•
:
You can press the DISC NAVIGATION button to stop
demonstration midway: The Disc Navigation screen will
appear.
If you choose "Auto", the demonstration will not start if a
disc is loaded with the power switch set to "
N
" PHOTO", or a card is loaded with the power switch
P
set to " PHOTO".
The demonstration function will not work when the DVD
video camera/recorder is connected to PC.
While the demonstration is being given, the recording
indicator will blink.
O
VIDEO" or
147