Switching Quality Of Still Image (Quality); Self-Timer - Hitachi DZ-MV1000E Instruction Manual

SWITCHING QUALITY OF STILL IMAGE (QUALITY)

You can switch the still recording quality only when using card.
It is recommended that you use "FINE" when recording vital images. (P. 29 "SIZE AND QUALITY
OF PHOTOS")
1
Press the MENU button,
choose "Quality" on the
"Record Functions
Setup" menu screen, and
then press the A
button.
2
Choose the option you want, and then press the
A button.

SELF-TIMER

You can record photos using the self-timer function, as with ordinary cameras.
The self-timer function is valid only when recording photos (stills).
1
Press the MENU button,
choose "Self Timer" on
the "Record Functions
Setup" menu screen, and
then press the A
button.
2
Select "On", and then press the A button.
The self-timer will be set.
3
Press the MENU button to end the setting.
Self-timer recording
3
Re c o r d F u nc t i on s S e t u p
Q u a l i t y FINE
Se l f T i mer NORM
OSD Ou t p u t ECO
ENTER RETURN
Note
The still quality setting will be stored in memory even when
the DVD video camera/recorder is turned off.
4
Re c o r d F u nc t i on s S e t u p
Se l f T i mer On
OSD Ou t p u t Of f
ENTER RETURN RAM
Note
•
•
•
1 0 REM
9 9 9
8 : 0 0
3 0 / 9 / 2 0 0 5
Press the MENU button
to end the setting.
:
Press the REC button.
The recording indicator at the front of DVD
video camera/recorder will blink.
The self-timer indicator will start to count
down, and recording will commence
approximately 10 seconds later.
:
You can also check that self-timer has been set by
reviewing the on-screen information.
To release the self-timer mode, choose "Off" on the
menu screen or turn DVD video camera/recorder off.
To suspend self-timer, press the REC button again
before recording starts, or press the
3
REM 9 9 9
8 : 0 0
NORM 3 0 / 9 / 2 0 0 5
Still recording quality
13
C
button.
87