Changing Setting Of Demonstration - Hitachi DZ-BX31E Instruction Manual

Changing Setting of Demonstration

This DVD video camera/recorder is equipped with a demonstration function.
The default at purchase time is "Auto", which will automatically start the demonstration approx. three
minutes after the DVD video camera/recorder is turned on.
Use the following procedure if you wish to view the demonstration immediately or change the setting
to "Off".
1
Press the MENU button.
2
Choose "Initial Setup",
"Demo Mode", and
then press the
button.
3
Press the or
button to choose the
desired option, and then press the
button.
Auto: To start demonstration approx. 3
minutes after turning the DVD video
camera/recorder on.
Off: To set demonstration to off.
Start: To start demonstration immediately.
Press the MENU button again: The menu
screen will disappear.
To stop the demonstration midway, press the
button.
The demo mode will end when the DVD
video camera/recorder is turned off or the
DISC EJECT button is pressed down.
134
Note
• You can press the DISC NAVIGATION button to stop
I n i t i a l S e t u p
Beep
• If you choose "Auto", the demonstration will not start if
Power Save
Re c o r d LED
L a n g u a g e A u t o
Demo Mode O f f
R e s e t S t a r t
ENTER RETURN RAM RAM
• While the demonstration is being given, the recording
:
demonstration midway: The Disc Navigation screen
will appear.
a disc is loaded with the power switch set to " " or
" ", or a card is loaded with the power switch set to
" ".
indicator will blink.