Copying Stills On Dvd-Ram Disc To Card (Copy) - Hitachi DZ-MV1000E Instruction Manual

COPYING STILLS ON DVD-RAM DISC TO CARD (COPY)

1
Set the power switch to "O VIDEO" or
"N PHOTO".
2
Press the DISC NAVIGATION button.
3
Select the still to be copied.
4
Press the MENU button.
5
Choose "Copy" on the
"Scene" menu screen,
and then press the A
button.
6
The "Copy to card"
screen will appear: If you
are sure you want to
copy the selected still,
press the A button.
If you want to change the
still to be copied, you can change it on this
screen.
7
The screen for verifying
copy will appear:
Choose "YES", and then
press the A button.
Choose "NO" to cancel
copy.
After Yes or No setting, the "Copy to card"
screen will be restored.
Repeat steps 6 and 7 to copy other stills to card.
8
Press the C button to quit.
106
Sc ene
De l e t e
Ed i t
Copy
Se l e c t
De t a i l
ETC
RAM
ENTER RETURN
Copy t o c a r d 0 0 3 / 0 1 4
ENTER EX I T RAM
Copy t o c a r d
Copy PHOTO s c e n e s
t o c a r d ?
YES NO
ENTER
:
Note
•
No movie can be copied.
•
If you press the MENU button before pressing the
button in step 6, the submenu screen will appear. (P.100)
•
See "Category" (P.126) to check the stills recorded on
DVD-RAM disc.
•
You can also select multiple scenes (P.96).
•
Even if all scenes, including movies, are selected to be
copied, only stills will be copied.
•
Data on card cannot be copied to disc.
•
The quality of still copied from disc to card will be the
same as when you recorded still on disc.
•
Stills recorded on a device other than this DVD video
camera/recorder may not be copied normally.
1
A