Table of Contents
Advertisement
Symptom
Executing "Export" on
DVD-MovieAlbumSE will
interrupt reading
midway.
When executing "Export"
on DVD-MovieAlbumSE,
it will take time to read.
"Hardware Removal"
results in error.
Miscellaneous
Symptom
Power does not come on,
or no operation occurs by
pressing button.
The date and time are
incorrect.
No scene can be deleted. Is the cursor placed on the scene to be deleted?
Disc cannot be removed. Did you detach the battery or AC adapter/charger before setting the
Disc cover cannot be
closed.
Cover will not open.
Operating sound is heard
cyclically.
Some vibrations are felt
or slight sound is heard
from mechanism.
Cause and Correction
Do not choose "Simple Export": If you do, reading will stop midway.
•
If stills are included in the range of "Export", it may take more time
because data must be re-encoded and read.
•
If "Divide by Maker" is not chosen, it may take some time because
data will be read while being re-encoded.
®
Exit Windows
once, and then disconnect the DVD video camera/
recorder. If your PC uses Windows
may be solved if you install Windows
Cause and Correction
Execute system reset (press the RESET button).
Has the DVD video camera/recorder been subjected to impact?
The DVD video camera/recorder could be damaged. Consult your
dealer.
Has the DVD video camera/recorder been left unused for a long
period of time?
The internal backup memory battery may be discharged:
Charge it.
If the selected scene (framed in red) exists, that scene will be deleted
even if you use yellow cursor to select any scene. Check the colours
of cursors and bar graph on the thumbnail screen.
power switch to "POWER OFF"?
Connect the battery or AC adapter/charger, set the power switch to
O
"
VIDEO" and then "POWER OFF", and remove the disc.
Is disc correctly inserted?
Was disc inserted from wrong direction?
Remove the disc and then reinsert it.
Is disc inserted in wrong orientation?
Remove the disc, and then reinsert it.
Connect a fully charged battery or AC adapter/charger, and then
turn the DVD video camera/recorder on.
Did you disconnect the battery or AC adapter/charger during
removal of disc? Reconnect the battery or AC adapter/charger, and
then turn the DVD video camera/recorder on.
This sound is heard because the disc is cyclically operated and does
not indicate a fault.
These vibrations or sound are caused by disc drive: This does not
indicate a fault.
®
2000 Professional, the problem
®
2000 Service Pack 3 or later.
Reference
page
140
Reference
page
166
34
94
40, 45
41
41
36, 40
37, 40
165
Hide quick links:
Advertisement
Table of Contents
