Zooming - Hitachi DZ-MV1000E Instruction Manual

Zooming

If you continue to hold the zoom lever on the "T"
control side with Dig. Zoom 40x or 240x specified,
the digital zoom will be activated midway (when
optical 18-power is exceeded). You can zoom up to
500-power.
W: recording wide area
(wide-angle)
1
Press the MENU button,
choose "Dig. Zoom" on
the "Camera Functions
Setup" menu screen, and
then press the A
button.
2
Choose the desired
magnification, and then press the A button.
3
Press the MENU button to end the setting.
Moving the zoom lever will display the digital
zoom bar.
When Dig. Zoom is "Off"
W
When Dig. Zoom is "On"(40x)
W
When Dig. Zoom is "On"(500x)
(only in movie recording)
W
T: recording enlarged
image (telephoto)
Came r a F u nc t i on s Se t u p
P r o g r am AE
Wh i t e Ba l .
E I S
D i g . Zo om 5 0 0 x
M IC . F i l t e r 4 0 x
O f f
ENTER RETURN RAM
0 : 0 0 : 0 0
REM
3 0 MIN
8 : 0 0
FINE 3 0 / 9 / 2 0 0 5
T
T
Digital zoom range
T
Digital zoom range
:
Note
•
The digital zoom setting will be stored in memory even
if the DVD video camera/recorder is turned off.
•
You can also use the DIGITAL ZOOM button on remote
control to switch the digital zoom setting: Pressing the
button during movie recording will switch the setting
between "Off", "40×" and "500x": Pressing the button
during still recording will switch between "Off" and "40×".
•
If you set zoom to 500× when recording still, the digital
zoom will be up to 40×.
•
When a subject is zoomed, it may be momentarily out of
focus.
•
When digital zoom is engaged, the image quality will be
rougher.
123
53