Boss GT-PRO Owner's Manual page 131

6
When the search has been completed, verify that the OMS Driver Setup dialog box lists the
BOSS GT-PRO, and click [OK].
fig.12-0260
* If the dialog box does not show "BOSS GT-PRO," check whether the GT-PRO is connected correctly,
and start up OMS Setup once again.
7
Verify that the OMS MIDI Device Setup dialog box lists the GT-PRO. Then click all check
boxes from the BOSS GT-PRO to check them, and click [OK].
A dialog box will appear, allowing you to save the settings in a file.
fig.12-0270
* For other connected MIDI devices as well, add a check mark to the port(s) you want to use. For details
on settings, refer to the manual that came with your MIDI device.
* BOSS/Roland can provide no guarantees or support regarding the operation of MIDI device made by
another company. Please contact the manufacturer of your MIDI device.
8
Input the desired file name, and click [Save].
9
In the Studio Setup window, change the device name indicating the MIDI device connected
to the GT-PRO as follows.
Click the device name, and you will be able to edit it.
BOSS GT-PRO: GT-PRO Control
fig.12-0280
10
From the File menu, select Save.
Driver installation and settings (Macintosh)
131