EverFocus 920 Instruction Manual page 137

DATE/TIME setup menu
Set Date/Time Manually
1. Click on the calendar button to set Date/Time manually. A calendar will show up as
shown below.
2. Click "<<" to decrease Year value, ">>" to increase Year value.
3. Click "<" to decrease Month value, ">" to increase Month value.
4. Click on the selected date directly.
5. Click on the Hour, Minute, Seconds to change Time value. Up arrow for increasing
and Down arrow for decreasing the value. This is also used to change between Am
and Pm.
6. Finally, click Apply to confirm setting.
127