Model 3086 G.shdsl Iad Overview; General Attributes - Patton electronics ipRocketLink 3086 User Manual
G.shdsl integrated access device
Hide thumbs
Also See for ipRocketLink 3086:
- Specification sheet (2 pages) ,
- Quick start manual (13 pages)
Table of Contents
Advertisement
1 • General Information
Model 3086 G.SHDSL IAD overview
The Model 3086 is a G.SHSDSL Integrated Access Device that combines high-speed IP routing and access via
ATM/FR/PPP along with TDM data access. The model 3086 offers direct connection to a 10/100Base-T
Ethernet environment, a V.35/X.21 Serial direct connection to a router or multiplexer, or a T1, E1, or
64K/G.703 port for connection to local device (e.g., PBX).
The Model 3086 complies with ETSI/ITU standard G.991.2 and allows full duplex, up to 2.3 Mbps speed
over a single twisted pair. In addition, the Model 3086 works at up to 4.6 Mbps over 2-wire. Whereas G.991.2
specifies 4-wire for data rates from 2.3 to 4.6 Mbps, the 3086 is able to operate up to 4.6 Mbps over jsut
2 wires! Speed setting ranges are user selectable in nx64 kbps increments from 64 kbps.
The following sections describe Model 3086 features and capabilities:
•
General attributes, see page 16
•
G.SHDSL Characteristics (Model 3086), see page 17
•
Ethernet, see page 17
•
Protocol support, see page 17
•
PPP support, see page 18
•
ATM protocols, see page 18
•
Management, see page 18
•
TDM Interface, see page 17
•
Security, see page 19
•
Front panel status LEDs, switches, etc., see page 19
General attributes
•
Compact, low cost IAD
•
10/100 Ethernet
•
Unlimited host support.
•
Comprehensive hardware diagnostics, works with any operating system, easy maintenance and effortless
installation.
•
Plug-and-Play operation for fast and seamless turn-up with pre-configured WAN and LAN options.
•
Built-in web configuration.
•
Setup allows for standard IP address and unique method for entering an IP address and mask WITHOUT
use of a console connection. Default IP address of 192.168.1.1/24.
•
Simple software upgrade using FTP into FLASH memory.
•
Twelve front panel LEDs indicate , DSL WAN, Sync Serial, Ethernet LAN speed and status, and Test
mode status.
•
Convenient and standard RJ connectors for Ethernet, Line, and Console.
•
Field Factory Default Option.
16
Model 3086 G.SHDSL Integrated Access Device User Guide
Model 3086 G.SHDSL IAD overview
Advertisement
Table of Contents
