Because it is a wood-burning device, your HYBRID-35 may emit a faint wood-burning odor. If this increases beyond normal, or if you notice an unusual
soot build-up on walls or furniture, check your exhaust system carefully for leaks. All joints should be properly sealed. Also clean your stove, following
instructions in "MAINTENANCE". If problem persists, contact your dealer.
Pressure switch error.
L-250 automatic high temperature switches, located under and above the auger.
L-250 manual reset high temperature switch, located beside convection blower.
Hopper is empty
Lighting error.
Hopper lid stayed open more than 3 minutes.
Inverted polarity in power outlet.(Will not keep the stove from operating)