Table of Contents
Advertisement
LabMaster 9 Zi-A Oscilloscopes
Touch any of the measurements on the table display (under the grid
display area) to show its corresponding Measure dialog.
Parameter Setup
1. Touch the parameter tab (Px) of an unused location or one that
you want to change.
2. Under Type, select a measurement type:
Measure On Waveforms
Applies measurements directly on the waveform as indicated on
the Source1 control.
Math On Parameters
Performs math (addition, subtraction, multiplication, division) on
parameters indicated on the Source1 and Source2 controls.
Advanced Web Edit
Selecting this type uses LeCroy's Processing Web for measurement
setup. This feature, available with the XWEB option, allows you to
chain practically unlimited math functions together for operation
on your waveform measurements.
3. Touch inside the Source1 field and select a channel, math trace,
memory trace, or other waveform to be measured.
185
LM9Zi-A-GSM-E RevA
Advertisement
Table of Contents
