Table of Contents
Advertisement
LabMaster 9 Zi-A Oscilloscopes
Off - This function turns off the Auxiliary Output signal.
Date/Time
From the Date and Time tab on the Utilities dialog, you can manually set
the time and date or get it from the Internet. If you elect to get the date
and time from the Internet, you need to have the oscilloscope connected
to the Internet through the LAN connector on your instrument's I/O
panel. You can also set time zones and daylight savings time.
1. You can set the Date and Time manually by providing a value in
the Hour, Minute, Second, Day, Month, and Year using your
preferred input control method. Additional information on using
the touch screen controls can be found in the Dialog Area (on
page 107). After providing values, touch the Validate Changes
button.
2. You can set the Date and Time from the Internet by first verifying
that your oscilloscope is connected to the Internet, and then
touching the Set from Internet button.
Note: The Simple Network Time Protocol (SNTP) is used.
251
LM9Zi-A-GSM-E RevA
Advertisement
Table of Contents
