Start Feature "D" Programming - Autopage C3-RS1100 OLED Installation Manual

Program:
1. Press and release the transmitter
chirp to indicate you are in features "Password pin code programming mode".
2. Within 5 seconds, press and release the valet Switch 9 times.
3. Within 15 seconds of the last entered 9ths digit, turn the Ignition Switch to "ON"
position.
4. Within 15 seconds press the valet Switch twice.
5. Turn the Ignition Switch to "OFF' position.
You will note the LED flashing nine times, pause and then flash two times, pause.
This pattern will be repeated three times indicating the new code (92) has been
accepted and stored in memory.
Exit: Press any button (except
up mode.
REMOTE START FEATURE PROGRAM MODE.

START FEATURE "D" PROGRAMMING:

1. Turn the Ignition 'switch 'ON/OFF' 3 TIMES and stay in OFF position.
2. Push the Valet switch 9 times (holding in on the 9
long chirp is heard then release the valet switch. You are now in the Sta rt feature
"D" programming mode.
3.
Press and release the transmitter button corresponding to the feature you want to
program.
One Chirp /
Press
LED one pulse
Transmitter
Factory Default
Button
Setting
Gasoline Engine
Diesel Engine
with
Wait-T o-Start
+
1
Light (H6/13
White/Green
wire must be
connected)
Factory alarm
2
disarm with
channel 3 on
Constant parking
3
light output upon
Remote Start
20 minutes run
4
time
5
Door lock before
start
C3 RS1100REV. A
button twice, [2] LED flash, [2] siren/horn
button) of the transmitter to exit the password pin set
th
push) until four chirps with one
Two Chirps / Three Chirps /
LED two pulse LED three puls e
Diesel Engine Diesel Engine
without without
Wait-To-Start Wait-To-Start
Light Light
10 seconds 15 seconds
warm -up timer warm-up timer
Without this
feature
Flashing parking
light output upon
Remote Start
30 minutes run 10 minutes run
time time
Door lock before
Door lock after start and Door
shut-down lock after
shut-down
24
Four Chirps /
LED four pulse
Diesel Engine
without
Wait-To-Start
Light
20 seconds
warm-up timer
5 minutes run
time
Without this
feature