Alarm Feature "B" Programming - Autopage C3-RS1100 OLED Installation Manual

Professional 2-way 915 mhz. oled remote car starter & 6 channel alarm system with built-in temperature sensor and two way serial port data link

Hide thumbs

Table Of Contents

Table of Contents

Press the transmitter button corresponding to the feature you want to

program.

One Chirp /

Press

LED one pulse

Transmitter

Factory Default

Button

Setting

Active arming

Automatic Rearm

off

Instant Door Ajar

error chirp

All Confirmation

chirps on

Panic with

Ignition off

Without Car-jack

mode

With Dome light

turns on & off

after ignition off

(45 second door

by-pass)

Lock/Arm &

Unlock/Disarm

Confirmation

Chirp

Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. 3 long chirps & 3 parking

light flashes will confirm exit.

45 seconds Delay Door Ajar Error Chirp:

This feature controls the error chirp that is generated if the system is armed with the door trigger

active. This is useful in a vehicle that has a long dome light delay af ter the door has been closed.

If the system is armed before the dome light has turned off, the security system will generate the

door trigger error chirp. Use this feature to disable the door open error chirp.

With Dome light turns on after ignition off:

Some vehicles turn on the dome light when ignition key is turned off. After remote start, with

alarm on, a false alarm may occur when the run time elapses and the dome light comes on. To

prevent this from happing, program Alarm Feature A-7 to "With Dome light turns on after ignition

off (45 second door by-pass)".