GE Quick Set V Series Owner's Manual page 8

Using the surface units--Touch pad-controlled models.
ON
The power level with a fraction
indicates the additional half-step
setting. You may hear clicking
sounds indicating the control is
maintaining your desired setting.
Surface Unit Cook Settings
The cooktop offers 19 power levels.Power
levels range from "L"to HI in precise half-step
increments. For example: l, 1-1/2, 2,
2-1/2 and up to HI.
Power Level"L", the lowest setting, is
recommended for "KeepWarm."
The power level increases one-half level with
each touch.
NOTE:When changing from a high heat setting
to a lower heat setting, the surfaceunit may stop
glowing. Thisis normal. The unit is still on and hot.
NOTE:Thiscooktop has a rapid heat-up feature.
If the cooktop is cool when turned on, it will glow
red for a short period of time until the desired
power setting is reached.
Single Surface Unit--Cook Settings
To turn on a single surface unit:
[] Touch the ON/OFF pad; then touch the
(+)/(-) pad.
[] Use the (+)/(-)pad to choose the desired
power setting.
To use the Melt feature:
Touch the ON/OFF pad; then touch MELT.
The element will automatically set to a
predetermined setting and "L"will be displayed.
To turn off a single surface unit, touch the ON/
OFF pad again.
To use the Simmer feature:
Touch the ON/OFF pad; then touch SIMMER.
The element will automatically set to a
predetermined setting and "Y' will be displayed.
Adjust using the {+)/{-)pad to increase or
decrease the simmer rate.
CONVECTION
Multi-Ring Burner
(can be dual or triple, depending on model)
Touch the ON/OFF pad for the right-front
surface unit.
Use the (+)/(-) pad to set the desired power
setting.
r-_ Touch the BURNERSIZEpad as needed to
select the desired burner size.
The light next to the BURNERSIZEpad indicates
which size the surface unit is on.
To turn the surface unit off, touch the ON/OFF
pad.
See page lO for additional information.