GE Quick Set V Series Owner's Manual page 32

Special features of your oven control.
COOK
TIME
START
Tone Volume (onsomemodels)
This feature allows you to adjust the tone
volumes to a more acceptable volume. There
are three possible volume levels.
[71 Touch the upper oven BROILHI/LO and
BAKE pads at the same time until the
display shows SF.
[] Touch the COOKTIMEpad. The display will
show 2 BEEP.This is the middle volume
level.
Touch the COOKTIMEpad again. The
display will show 3 BEEP.This is the loudest
volume level.
Touch the COOKTIMEpad again. The
display will show 1 BEEP.This is the
quietest volume level.
For each time the level is changed, a tone
will sound to provide an indication of the
volume level.
Choose the desired sound level (1 BEEP,2
BEEP,3 BEEP).
Touch the STARTpad to activate the level
shown.
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour military
time clock or black out the clock display,follow
the steps below.
[] Touch the upper oven BROILHI/LO and
BAKE pads at the same time until the
display shows SF.
Touch the CLOCK pad once. The display
will show 12 hr. If this is the choice you
want, touch the STARTpad.
Touch the CLOCK pad again to change to the
24-hour military time clock. The display will
show 24 hr. If this is the choice you want, touch
the STARTpad.
Touch the CLOCK pad again to black out the
clock display.The display will show OFF.If this is
the choice you want, touch the STARTpad.
NOTE:If the clock is in the black-out mode,you
will not be able to use the Delay Start function.
i i ¸
Auto Recipe
TM
Conversion (on some models)
When using convection bake, the Auto Recipe TM
Conversionfeature will automatically convert
entered regular baking temperatures to
convection baking temperatures.
On some models
the
display will
show
the actual converted (reduced)temperature.
For example, if you enter a regular recipe
temperature of 176.7°C(350°F)and touch the
STARTpad, the display will show CON and
the converted temperature of 162.8°C(325°F).
Double oven and electronic surface control
models come with this feature enabled but will
not show the Converted Temperature.
To deactivate the feature:
Fi1
Touch the upper oven BAKEand BROIL
HI/LO pads at the same time until the
display shows SF.
Touch the CONVECTION COOKpad. The
display will show CON ON. Touch the
CONVECTION COOKpad again. The
display will show CON OFF.
[] Touch the STARTpad.
To reactivate the feature, repeat steps
1-3 above but touch the START pad when CON
ON is in the display.
ii !i iii IIIIII IIIIIIII
32
Cook and Hold (onsome models)
Your new control has a cook-and-hold feature
that keeps cooked foods warm for up to 3
hours after the cooking function is finished.
To activate this feature, follow the steps below.
Touch the BAKE and BROILHI/LO pads at
the same time until the display shows SF.
Touch the COOKINGTIME pad. The
display will show Hid OFF.
%
Touch the COOKINGTIME pad again to
activate the feature. The display will show
Hid ON.
Touch the STARTpad to activate the cook-
and-hold feature and leave the control set
in this special features mode.