See Figure 1.
The safe use of this product requires an understanding
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempt-
ing. Before use of this product, familiarize yourself with all
operating features and safety rules.
Bits provided with the tool can be placed in the storage
area, located on the base of the tool.
This tool features an impact speed of 0-3,500 blows per
minute (BPM). Blows per minute is the number of impacts
The charger has a key-hole hanging feature for conve-
storage. Screws should be installed
so that the center distance is 4-1/2 in.
Quickly and easily change bits without the need for tools.
Your tool has a direction of rotation (forward/reverse/
center lock) selector located above the switch trigger for
changing the direction of bit rotation. Setting the switch
trigger in the OFF (center lock) position helps reduce the
possibility of accidental starting when not in use.
The LED worklight, located on the front of the tool, illumi-
nates when the switch trigger is depressed. This provides
extra light for increased visibility.
The magnetic bit holder extends the reach of the impact
driver bit and holds the bit and screws until you are ready
to drive them.
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with
decreased trigger pressure.
This product has been shipped completely assembled.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily
operated the tool.
 If any parts are damaged or missing, please call
Standard Bits (2)
Magnetic Bit Holder
1/4 in. Socket Adaptor
If any parts are damaged or missing
do not operate this tool until the parts are replaced.
Failure to heed this warning could result in serious
Do not attempt to modify this tool
or create accessories not recommended
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the tool when assembling