Craftsman NEXTEC 320.61189 Operator's Manual

Craftsman NEXTEC 320.61189 Operator's Manual

12 volt 1/4-in. lithium-ion cordless impact driver


12 Volt
Lithium-ion Cordless
impact Driver
Model No. 320. 61189
by an
qualified battery
charger for a
better environment
To reduce the risk of
injury, the user must read and understand
the Operator's
this product.
* Warranty
* Safety
* Assembly
* Operation
* Maintenance
Sears, Roebuck and Co., Hoffman Estates, IL 60179


Table of Contents

Subscribe to Our Youtube Channel

Summary of Contents for Craftsman NEXTEC 320.61189

  • Page 1 WARNING: To reduce the risk of * Assembly injury, the user must read and understand * Operation the Operator's manual before using * Maintenance this product. Charge battery Before first Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www,craftsman,com...
  • Page 2 If this Craftsman tool fails to give complete satisfaction within one year from the date of purchase, return it to any Sears store or Parts & Repair Center or other Craftsman outlet in the United States for free repair (or replacement, if repair proves impossible).
  • Page 3 The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful atten- tion and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes proper accident...
  • Page 4 Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes Current Hertz Frequency (cycles...
  • Page 5: General Safety Rules

    GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. The term "power tool" in all of warnings listed below refers to corded power tools or battery-operated (cordless) power tools.
  • Page 6: Personal Safety

    PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operat- ing a power tool. Do not use a power tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal...
  • Page 7 POWER TOOL USE AND CARE Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and more safely at the rate for which it was designed. Do not use the power tool if the switch does not turn it ON and OFF. Any power tool that cannot be controlled with the switch is dangerous...
  • Page 8 BATTERY TOOL USE AND CARE • Make sure that the switch is in the OFF position before inserting the battery pack. Inserting the battery pack into power tools that have the switch invites accidents. Recharge only with the charger specified by the manufacturer.
  • Page 9: Safety Rules For Charger

    SERVICE • Have your power tool serviced by a qualified repair person. When servicing a power tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unau- thorized parts or failure to follow Maintenance instructions may create a risk of shock or injury.
  • Page 10 Make sure that the cord is located so that it will not be stepped on, tripped over, come in contact with sharp edges or moving parts, or otherwise subjected to damage or stress. This will reduce the risk of accidental falls, which could cause injury and damage to the cord, which could then result in electric shock.
  • Page 11: Important Safety Instructions

    • Save these instructions. Refer to them frequently and use them to instruct oth- ers who may use this tool. If you lend this tool to someone else, also lend these instructions to them to prevent misuse of the product and possible injury. IMPORTANT SAFETY INSTRUCTIONS Save these instructions.
  • Page 12 KNOW YOUR IMPACT DRIVER (Fig.l) Fig. 1 Sleeve Vents LED Worklight Direction of Rotation Selector (Forward/Center Variable Speed LocW Reverse) Trigger Switch Battery Release Button Battery Pack PRODUCT SEPCIFICATION Motor 12 Volt DC Switch VSR (Variable Speed Reversible) No Load Speed 0-2200 Impacts per minute...
  • Page 13 WARNING: The safe use of this product requires an understanding of the information on the tool and in this operator's manual, as well as knowledge the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
  • Page 14: Operation

    LOW-BATTERY CAPACITY iNDiCATOR If the LED worklight begins to rapidly and continuously flash when the trigger switch on the Driver is depressed, the battery pack power has run out, and the battery pack should be recharged. Unlike other battery pack types, Lithium-Ion battery packs deliver fade-free power for their entire run time.
  • Page 15: How To Charge The Battery Pack

    Due to Lithium-Ion fade-free Fig. 2 properties, the only time it is necessary to charge the Lithium-Ion battery pack is when the pack has reached the end of its charge. To signal the end of charge, power to the tool will drop quickly.
  • Page 16: Defective Battery

    LED FUNCTIONS OF CHARGER (Fig. 3) BATTERY GREEN LED INDICATOR ACTION PACK Hot/Cold TEMP. H|/LO when battery returns to Charging will begin battery (SEE MANUAL) 32°F (0°O)-104°F (40°0) BATTERY Defective Flashing Charger/Adapter DErECT,VE [_ Battery pack or defective CHARG|NG Charging Flashing Charging BATTERY...
  • Page 17 BATTERY FULL If the battery pack is within normal temperature range, the green LED will illuminate and the red LED will be off. The battery pack is fully charged and ready to use. The battery pack will fully charge, but will not overcharge, if left on the charger.
  • Page 18 TRIGGER SWITCH (Fig. 5) To turn the impact driver ON, depress the trigger switch. turn it OFF, release the trigger switch. Fig. 5 VARIABLE SPEED (Fig.5) ___F----, _._ Direction-of- The variable-speed trigger ] \ _-_\ rotation selec- switch delivers higher /___ _-"...
  • Page 19 LED WORKMGHT (Fig. 6) Fig. 6 The LED worklight, located on the front of the Impact Driver, will illuminate when the trigger switch is depressed. This provides additional light on the surface of the workpiece operation in lower-light areas. The LED worklight will turn off when the trigger switch LED Worklight...
  • Page 20: Screws And Nuts

    To avoid serious personal injury, always remove the battery pack from the tool when cleaning or performing any maintenance. WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING:...
  • Page 21 the battery pack or attempt to replace the batteries. Handling of the batteries, especially when wearing rings and jewelry, could result in a serious burn. To obtain the longest possible battery life, read and understand operator's manual. • It is good practice to unplug the Charger/Adapter and remove the Lithium- Ion battery pack when not in use.
  • Page 22 PROBLEM CAUSE SOLUTION The Driver does not Battery is depleted Charge the battery work Sleeve is not released Release the sleeve Bit cannot be installed Bit does not fit the Use suitable adapter sleeve Clean, clear vents. Do Be sure cooling vents are free from dust and not cover with hand dur-...
  • Page 23 12.0=VOLT LITHIUM=ION CORDLESS 1/4=IN. iMPACT DRIVER MODEL NO. 320. 61189 The Model Number will be found on the Nameplate attached to the handle of the impact Driver. Always mention the Model Number when ordering parts for this tool. 61189 Manual_Revised_09 0306 Page 23...
  • Page 24 12.0=VOLT LITHIUM=ION CORDLESS 1/4=IN. iMPACT DRIVER MODEL NO. 320. 61189 The Model Number will be found on the Nameplate attached to the handle of the Impact Driver. Always mention the Model Number when ordering parts for this tool. 3124017000 Decorate Cover 3124561000 Decorate...
  • Page 25 3123112000 Rubber Ring 5620037000 Screw 5650007000 Spring Washer 3123997000 Gear Case 5690182000 Rubber Ring 2790150000 Motor Assy 3124560000 LED Cover 3124167000 F/R Button 4890532000 3320645000 Left Housing Assy 3704254000 Handle Hoop 3402298000 Contact Receptacle ASSY 2770153000 5120 Power Pack 4870400000 Trigger Switch 3124559000 Switch trigger...
  • Page 26 61189 Manual_Revised_09 0306 Page 26...
  • Page 27 61189 Manual_Revised_09 0306 Page 27...
  • Page 28 Your Home For expert troubleshooting and home solutions advice: manage home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it ! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself For Sears professional installation of home appliances...

Table of Contents