Read all instructions.
follow all instructions
listed below may result in
electric shock, fire and/or serious injury. The term
"power tool" in all of the warnings listed below
refers to your mains-operated
(corded) power tool
(cordless) power tool.
 Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
 Do not operate
power tools in explosive
such as in the presence
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
 Keep children
away while operat-
ing a power tool. Distractions can cause you to lose
 Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed
Unmodified plugs and matching outlets will reduce
risk of electric shock.
 Avoid body contact with earthed or grounded surfaces
such as pipes, radiators,
There is an increased risk of electric shock if your body
is earthed or grounded.
 Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the risk
of electric shock.
 Do not abuse the cord. Never use the cord for
pulling or unplugging
the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
 When operating a power tool outdoors,
cord suitable for outdoor
use. Use of a
cord suitable for outdoor use reduces the risk of elec-
 Use battery
only with charger
(Item No. 911 044)
(Item No. 911 041)
 Stay alert, watch what you are doing and use
sense when operating
a power tool. Do
not use a power tool while you are tired or under
of drugs, alcohol
moment of inattention while operating power tools may
result in serious personal injury.
 Use safety equipment.
Always wear eye protection.
Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appro-
priate conditions will reduce personal injuries.
 Avoid accidental
Ensure the switch is in
in. Carrying power
tools with your finger on the switch or plugging in
power tools that have the switch on invites accidents.
 Remove any adjusting
key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
 Do not overreach.
Keep proper footing
at all times. This enables better control of the power
tool in unexpected situations.
 Dress properly.
Do not wear loose clothing
Keep your hair, clothing
and gloves away
from moving parts. Loose clothes, jewelry, or long
hair can be caught in moving parts.
 if devices
for the connection
ensure these are
used. Use of these devices
can reduce dust-related
 Do not wear loose clothing
or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
 Do not use on a ladder or unstable
footing on a solid surface enables better control of the
power tool in unexpected situations.
TOOL USE AND CARE
 Do not force the power tool. Use the correct power
tool for your application.
The correct power tool will
do the job better and safer at the rate for which it was
 Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
 Disconnect the plug from the power source and/or
the battery pack from the power tool before making
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
 Store idle power tools out of the reach of children
and do not allow persons
with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
 Maintain power tools. Check for misalignment
binding of moving parts, breakage
of parts, and any
that may affect the power tool's
have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
 Keep cutting
tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.