Craftsman 315.115460 Operator's Manual page 13

BIT STORAGE
See Figure 7.
When not in use, bits provided with the tool can be placed
in the storage area located at the bottom of the tool
handle.
_,_ SCREWDRIVER
S BiTS
BiTSTORAGE AREA
Fig. 7
INSTALLING BITS
See Figure 8.
[] Lock switch trigger on the tool by placing the direction
of rotation selector in center position.
[] Pull the coupler forward and hold in position.
[] Insert bit straight into coupler.
[] Slide the coupler back slowly and release.
PULLCOUPLER
FORWARD
RELEASE
COUPLER
BiT
SERT BiT
LOCKING GROOVE
COUPLER
/
Fig. 8
REMOVING BITS
See Figure 8.
[] Lock switch trigger on the tool by placing the direction
of rotation selector in center position.
[] Pull the coupler forward and hold in position.
[] Pull bit straight out of coupler.
INSTALLING THE MAGNETIC BIT HOLDER AND
DRILL BIT OR SOCKET ADAPTOR
See Figure 9,
[] Lock the switch trigger by placing the direction of rota-
tion selector in the center position.
[] Pull the coupler forward and hold in position.
[] Insert magnetic bit holder straight into coupler as
shown.
[] Slide the coupler back slowly and release.
[] Insert drill bit or socket adaptor straight into bit holder
as shown.
PULLCOUPLER
FORWARD
RELEASE
MAGNETIC
BiTHOLDER
1/4 in.SOCKET
ADAPTOR
Fig. 9
REMOVING THE MAGNETIC BIT HOLDER AND
DRILL BIT OR SOCKET ADAPTOR
See Figure 9.
[] Lock the switch trigger by placing the direction of rota-
tion selector in the center position.
[] Pull drill bit or socket adaptor straight out of bit holder.
[] Pull the coupler forward and hold in position.
[] Pull magnetic bit holder straight out of coupler.
13