GE GTH18DBPARCC Owner's Manual And Installation Instructions page 4

Top-freezer refrigerators 18 and 19 models
Table of Contents

Advertisement

Available languages

Available languages

IMPORTANT SAFETY INFORMATION.
READALLINSTRUCTIONS BEFORE USING.
A WARNING!
HOWTOCONNECT ELECTRICITY
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
For personal safe_ this appliance must be properly grounded.
The power cord of this appliance is equipped with
a 3-prong (grounding)
plug which mates with a
standard 3-prong (grounding)
w_l outlet to
minimize the possibility of electric shock hazard
from this appliance.
Have tile wall outlet and circuit checked by a
qualified electrician to make sure tile outlet is
properly grounded.
Where a standard 2-prong wall oudet is
encountered,
it is your pel.-sonal responsibility and
obligation m have it replaced witll a properly
grounded
3-prong wall outlet.
The refrigerator should always be plugged into its
own individual electrical oudet which has a voltage
rating tllat matches the rating plate.
This provides tile best performance
and also
prevents overloading house wiring circuits which
could cause a fire hazard from overheated wires.
Never unplug your refrigerator by pulling on the
power cord. _Mwaysgrip plug firmly and pull
sn'aight out from tile outlet.
Repair
or replace
immediately
all power cords that
have hecome
frayed or odmrwise
damaged.
Do not
use a cord that shows cracks or abrasion
damage
along its lengtll
or at eidmr
end.
When moving the refiigerator
away from tile
wall, be careful not to roll over or damage the
power cord.
USE OF ADAPTER P LUGS (Adapter
pl,gs not permitted
in
Canada)
Because of potential safety hazards under certain conditions, we strongly recommend against the
use of an adapter plug.
Howevm;
if you must use an adapter,
where
local
codes permit,
a temporary connection may be made
m a properly
grounded
2-prong
wall outlet
by use
era UL-listed
adapter
a'_ailable at most local
hardware
stores.
The larger slot in tile adapter must be aligned witll
tile larger slot in dm wall outlet to provide proper
polarity in the connection
of the power cord.
When disconnecting
tile power cord from the
adapter, al,a-ayshold tile adapter in place with one
hand while pulling tile power cord plug with tile
other hand. If this is not done, tile adapter ground
terminal is very likely to break with repeated
use.
If the adapter
ground
terminal
breaks,
DO NOT USE
tlle refrigerator
until a proper
ground
has been
established.
Attaching theadaptergroundterminal to a waft outlet
coverscrewdoesnot groundthe applianceunlessthe
coverscrewis metal,not insulated,and the waftoutlet is
groundedthroughthe housewiring. You shouldhavethe
circuitcheckedby a quaddedelectricianto makesurethe
outlet is properlygrounded.
READ ANDFOLLOW THIS SAFETY I NFORMATION CAREFULLY.
SAVETHESE INSTRUCTIONS
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents