Unpacking And Checking Contents; Table Of Contents; Miter - Craftsman 113.226640 Owner's Manual

CONTENTS
WARRANTY ................................. 2
GENERAL SAFETY INSTRUCTION
FOR POWER TOOLS .................... 2
ADDITIONAL SAFETY INSTRUCTIONS
FOR TABLE SAWS ...................... 3
MOTOR SPECIF_CATIONS AND ELECTRICAL
REQUIREMENTS ........................ 5
UNPACKING AND CHECKING CONTENTS . .. 6
Tools Needed .............................. 6
List o1 Loose Parts ......................... 7
ASSEMBLY .................................. 7
Assembling Steel Legs ..................... 7
Mounting Saw ............................. 8
Installing Handwheels ...................... 8
Checking Table Insert ...................... 9
Heeling Adjustment of Parallelism of
Sawbtade to Miter Gauge Groove ......... 9
Btade Tilt or Squareness of Blade to Table 10
Btade Bevatton ........................... 12
T Ht and Elevation Mechanism .............. 12
Attaching Table Extensions ................ 12
installing Rip Fence Guide Bars and Switch 13
Aligmng Rip Fence ........................ 16
Adjusting Rip Scale Indicator .............. !7
Installing Blade Guard .................... 18
Adjusting Miter Gauge .................... 20
GETTING TO KNOW YOUR SAW ........... 20
On-,Off Switch ............................ 20
Elevation Handwheel ...................... 21
Till Handwheel ........................... 21
Rip Fence ................................ 2t
Miter Gauge .............................. 21
B_ade Guard .............................. 22
Table Insert .............................. 22
Removing and Installing Sawblade ......... 22
Exacti-Cut ................................ 22
BASIC SAW OPERATION USING THE MITER
GAUGE ................................ 23
Work Helpers ............................. 23
Using the Miter Gauge .................... 24
Crosscutting ............................... 24
Repetitive Cutting ......................... 25
Miter Cutting ............................. 26
Bevel Crosscutting ........................ 26
Compound Miter Cutting .................. 26
BAStC SAW OPERATION USING ]HE RIP
FENCE ................................. 26
Ripping .................................. 27
Bevel Ripping ............................. 27
Cutting Panels ............................ 29
Ploughing and Molding ................... 29
Resawing ................................. 30
Rabbeting ................................ 30
Dadoing .................................. 30
Molding Cutting .......................... 31
Using Featherboards ...................... 31
MOTOR .................................... 31
MAINTENANCE ............................ 32
LUBRICATION ............................. 32
RECOMMENDED ACCESSORIES ........... 33
TROUBLE SHOOTING ...................... 33
REPAIR PARTS ............................. 36
UNPACKING AND CHECKING CONTENTS
TOOLS NEEDED
Medium Serewdrlve r
Small Screwdriver
COMBINATION SQUARE MUST BE TRUE,
STRAIGHT EDGE OF BOARD
3/4" THICK. THIS EDGE MUST
DRAW LIGHT LINE ON BE PERFECTLY STRAIGHT.
BOARD ALONG THIS EDGE, _-,
#2 Phillips Screwdriver
Pliers
"%y Combination Square
3/8 in, 7/16 in.
1/2 in. 9/16 In.
3/4 in.
Model 1 t3.226640 Table Saw is shipped complete in
one carton.
Separate all parts from packing materials and check
each one with the illustration and the list of Loose
Parts to make certain all items are accounted for,
before discarding any packing material.
If any parts are missing, do not attempt to assemble
the table saw, plug in the power cord or turn the
switch on until the missing parts are obtained and
are installed correctly.
SHOULD BE NO GAP OR OVERLAP
HERE WHEN SQUARE IS FLIPPED
OVER IN DOTTED POSITION.
Remove the protective oi! that is applied to the table
top and edges of the table. Use any ordinary
household type grease and spot remover.
CAUTION: To avoid fire or health hazard never use
gasoline, naptha or similar highly volatile solvents.
Apply a coat of automobile wax to the table.
Wipe all parts thoroughly with a clean, dry cloth.
WARNING: FOR YOUR OWN SAFETY, NEVER
CONNECT PLUG TO POWER SOURCE OUTLET
UNTIL ALL ASSEMBLY STEPS ARE COMPLETE,
AND YOU HAVE READ AND UNDERSTAND THE
SAFETY AND OPERATIONAL INSTRUCTIONS.
6