Advertisement
STEP 12: (SEE FIGURE 12)
Only for 54" mower decks
*
Assemble a frame bracket to the L.H. foot rest. Use
two 3/8" × 1-1/4" hex bolts, two 3/8" lock washers and
two spacers.
*
Assemble a shoulder bolt (P) and a 3/8" flanged nut
(BB) (both supplied with the snow thrower) to the
frame bracket.
54" MOWER DECKS
3/8" x 1-1/4"
HEX BOLT
3/8" LOCK
WASHER
FRAME
BRACKET
SPACER
SPACER
3/8" FLANGED NUT (BB)
(snow thrower)
l
SHOULDER
BOLT (P)
(snow thrower)
\
\
FIGURE 12
LEFT SiDE ViEW
STEP 13 (SEE FIGURE 13)
Only for 54" mower decks
*
Assemble a frame bracket to the R.H. foot rest. Use
two 3/8" × 1" hex bolts and two 3/8" lock washers.
*
Assemble a shoulder bolt (P) and a 3/8" flanged nut
(BB) (both supplied with the snow thrower) to the
frame bracket.
54" MOWER
DECKS
FRAME
3/8" x 1"
BRACKET
HEX BOLT
3/8" LOCK
WASHER
SHOULDER
BOLT (P)
(snow thrower)
3/8" FLANGED NUT (BB)
(snow thrower)
FIGURE 13
RIGHT SiDE ViEW
ALL PARTS IN THE FOLLOWING iNSTRUCTiONS
ARE SUPPLIED WITH THE SNOWTHROWER
EXCEPT
FOR THOSE PARTS SHOWN IN GRAY, WHICH ARE
SUPPLIED WITH THE KiT.
STEP 14: (SEE FIGURE 14)
*
Attach the two suspension arms to the outside of the
clutch/idler assembly using two 5/16"× 3/4" hex bolts
(E) and 5/16" nylock nuts (CC) for each arm.
5/16" NYLOCK
_
NUT (CO)
>
SUSPENSION
_
5/16" x 3/4"
ARM
HEX BOLT (E)
FIGURE 14
STEP 15: (SEE FIGURE 15)
*
Attach the two mounting brackets to the front of the
clutch/idler assembly using four 3/8" x 1" hex bolts
and 3/8" nylock nuts. Place the frame brackets on the
outside of the assembly frame.
3/8" x 1"
HEX BOLT
MOUNTING
BRACKET
\
@
T
3/8"
NYLOCK
NUT
FIGURE 15
Call 1-866-576-8388
for missing parts or assembly help
5
DO NOT RETURN TO STORE
Advertisement
