Advertisement
Quick Links
instruction Manual
CR!FTSMRN °
SNOW THROWER KiT
Model No. 486.24831
DO NOT RETURN TO STORE
For Missing Parts or Assembly
Questions
Call 1-866-576-8388
CARTON CONTENTS
1
2
/3
5
REF
QTY
PART NO
1
2
25301
2
1
64943
3
1
64944
DESCRIPTION
REF
QTY
Frame Bracket
4
1
Front Hanger Bracket, L.H. 54"
5
1
Front Hanger Bracket, R.H. 54"
6
2
7
1
PART NO
63571
63572
26557
26556
DESCRIPTION
Hanger Bracket, L.H.
Hanger Bracket, R.H.
Mounting Bracket
Side Plate, R.H.
HARDWARE
PACKAGE CONTENTS
jA
SHOWN ACTUAL SIZE
B
jC
_jD
E
F
REF
QTY
PART NO
A
2
43087
B
14
43001
C
4
43350
DESCRIPTION
3/8" x 1-1/4" Hex Bolt
3/8" x 1" Hex Bolt
3/8" x 1" Carriage Bolt
REF
QTY
D
12
E
12
F
2
PART NO
HA21362
43003
23625
DESCRIPTION
3/8" Nylock Nut
3/8" Lock Washer
Spacer
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.sears.com/craftsman
PRINTED IN U.S.A.
FORM NO. 41039 rev. (12/10/08)
Advertisement
Related Manuals for Craftsman 486.24831
Summary of Contents for Craftsman 486.24831
- Page 1 HA21362 3/8" Nylock Nut 43001 3/8" x 1" Hex Bolt 43003 3/8" Lock Washer 43350 23625 3/8" x 1" Carriage Bolt Spacer Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears.com/craftsman PRINTED IN U.S.A. FORM NO. 41039 rev. (12/10/08)
- Page 2 USE THE FOLLOWING INSTRUCTIONS STEP 2: (SEE FIGURE 2a or 2b) Attach the R.H. side plate (supplied with the kit) to the IN PLACE OF STEPS #1 THRU #46 IN THE tractor. If you removed bolts as shown in figure la, SNOW THROWER MANUAL.
- Page 3 if you have a 54" mower deck skip to step #9. STEP 6: (SEE FIGURE 6) For smaller decks use the following instructions. • Assemble the LH. hanger bracket to the left side of the tractor frame using two 3/8" x 1" hex bolts, two STEP 4: (SEE FIGURE 4) 3/8"...
- Page 4 STEP8: (SEEFIGURE 8) STEP 10: (SEE FIGURE 10) • Assemble a frame bracket to the R.H. foot rest. Use Only for 54" mower decks two 3/8" × 1" he× bolts and two 3/8" lock washers. Assemble the 54" R.H. hanger bracket to the holes on •...
- Page 5 ALL PARTS IN THE FOLLOWING iNSTRUCTiONS STEP 12: (SEE FIGURE 12) ARE SUPPLIED WITH THE SNOWTHROWER EXCEPT Only for 54" mower decks Assemble a frame bracket to the L.H. foot rest. Use FOR THOSE PARTS SHOWN IN GRAY, WHICH ARE SUPPLIED WITH THE KiT.
- Page 6 STEP 16: (SEE FIGURE 16) STEP 18: (SEE FIGURE 18) Turn the clutch/idler assembly upside down. Two different length drive belts are supplied with your Hook the end of the spring (GG) onto the bottom of the snow thrower. Select the shorter belt with #46989 bolt and nut which secure the idler pulley to the upper printed on it.
- Page 7 COMPLETE STEPS #47 THRU #59 iN THE STEP 19: (SEE FIGURE 19) Only for mower decks smaller than 54" SNOW THROWER MANUAL, THEN RETURN • Attach the rear of the clutch/idler assembly to the tractor TO STEP 21 ON THiS PAGE. frame by sliding the notched arms of the assembly onto the shoulder bolts assembled to the frame brackets.
- Page 8 Your Home For expert troubleshooting and home solutions advice: www.managemyhome.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories owner's manuals that you need to do-it-yourself.