Download Print this page

Craftsman 486.24598 Owner's Manual

Front bumper
Hide thumbs

Advertisement

Quick Links

Owner's Manual
CRRFr. NRN °
FRONT
Model Nos. 486.245993, 486.24598
Fits 917 Series LT/YT/GT Tractors
DO NOT RETURN TO STORE
For Missing
Parts or Assembly
Questions
Call 1-866-576-8388
CAUTION:
Before using this product,
read
this manual and follow all Safety
Rules and
Operating
Instructions.
• Safety
• Assembly
,, Operation
,, Maintenance
,, Parts
Sears, Roebuck
and Co., Hoffman
Estates,
IL 60179 U.S.A.
www.craftsman.com
PRINTED IN U.S.A.
FORM NO. 40502 (REV. 1/07)

Advertisement

loading

  Related Manuals for Craftsman 486.24598

  Summary of Contents for Craftsman 486.24598

  • Page 1 Owner's Manual CRRFr. NRN ° FRONT Model Nos. 486.245993, 486.24598 Fits 917 Series LT/YT/GT Tractors CAUTION: Before using this product, this manual and follow all Safety Rules and Operating Instructions. Sears, Roebuck and Co., Hoffman www.craftsman.com PRINTED IN U.S.A. read Estates, IL 60179 U.S.A.
  • Page 2 YEAR LIMITED WARRANTY When operated and maintained according to the instructions supplied with it, if this Tractor Brush Guard fails due to a defect in material or workmanship within one year from the date of purchase, call 1-800-4-MY-HOME ® to arrange for free repair. If this product is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase.
  • Page 3 CAUTION!Muffleris hot!Allowengineto cool downbeforeproceeding with bumper installation. STEP 1 : (SEE FIGURE 2) Remove tractor hood. (Refer to tractor manual.) Remove the browning shield as shown below. REMOVE FRONT SCREWS REMOVE BROWNING SHIELD FIGURE 2 STEP 2: (SEE FIGURE 3) Insert a hex bolt (C) into the second mounting hole from the front of the tractor frame and fully tighten a hex nut (D) onto the bolt.
  • Page 4 DUAL ROD DECK SUSPENSION IMPORTANT: Thoso instructions are for tractors with dual mower deck suspension brackets like the examples shown in figure 2 on this page. CAUTION! Muffler is hot! Allow engine to cool down before proceeding with bumper installation. STEP 1 : (SEE FIGURE 1) •...
  • Page 5 STEP 3: (SEE FIGURE 3) Place plug (E) on a work bench or solid table and push end of bumper down onto plug. Repeat for second plug. See figure 1. BUMPER PUSH DOWN WITH EVEN PRESSURE WORK BENCH OR SOLID TABLE _PLUG FIGURE 3...
  • Page 6 OTES...
  • Page 7 OTES...
  • Page 8 For repair-in your home-of lawn and garden equipment, no matter who made it, no matter who sold it! For the replacement owner's manuals that you need to do-it-yourself. For Sears professional and items like garage door openers and water heaters. 1-800-4-MY-HOME Call anytime, day or night (U.S.A.

This manual is also suitable for:

486.245993