Advertisement
STEP8: (SEEFIGURE 8)
•
Assemble a frame bracket to the R.H. foot rest. Use
two 3/8" × 1" he× bolts and two 3/8" lock washers.
•
Assemble a shoulder bolt (P) and a 3/8" flanged nut
(BB) (both supplied with the snow thrower) to the
frame bracket.
•
Proceed to step #14 on page 6.
FRAME
BRACKET
318" LOCK
WASHER
\
SHOULDER
BOLT (P)
(snow thrower)
/
/
3/8"FLANGED
NUT (BB)
(snow thrower)
FIGURE 8
RIGHT SiDE ViEW
STEP 10: (SEE FIGURE 10)
Only for 54" mower decks
*
Assemble the 54" R.H. hanger bracket to the holes on
the right side of the tractor frame where the mower stop
bracket was removed. Fasten with two 3/8" × 1" he×
bolts, two 3/8" lock washers and one 3/8" nylock nut.
54" MOWER DECKS
3/8" NYLOCK
3/8" LOCK
NUT
WASHER
R.H. HANGER
BRACKET (54")
3/8" x 1"
HEX BOLT
3/8" LOCK
WASHER
/
3/8" x 1"
HEX BOLT
FIGURE 10
RIGHT SiDE ViEW
Steps #9 thru #13 for tractors with 54" mower decks.
STEP 9: (SEE FIGURE 9)
Only for 54" mower decks
*
Remove and store the mower stop bracket and bolt
from both sides of the tractor frame.
*
Remove the two bolts from the bottom of the foot
rests on both sides of the tractor frame.
STEP 11: (SEE FIGURE 11)
Only for 54" mower decks
*
Assemble the 54" L.H. hanger bracket to the holes
where the mower stop bracket was removed on the left
side of the tractor frame. Fasten with two 3/8" x 1" hex
bolts, two 3/8" lock washers and two 3/8" nylock nuts
54" MOWER DECKS
54" MOWER DECKS
L.H. HANGER
BRACKET
(54")
3/8" x 1"
HEX BOLT
3/8" LOCK
WASHER
3/8" NYLOCK NUT
FIGURE 9
4
RIGHT SiDE ViEW
FIGURE II
LEFT SiDE ViEW
Call 1-866-576-8388
for missing parts or assembly help
DO NOT RETURN TO STORE
Advertisement
