Table of Contents
Advertisement
Available languages
Available languages
Changing
the wash cyde options
Soak
Advance
Wash
Rinse
Soak
The Soak option
adds a 2 hour soak into the middle of the wash phase of the
c.vc[e. Dunng the soak, the washer will agitate for a few seconds every' mk_ute,
At the completion
of the soak period the AquaSm_rt
_ will then complete
the
rest of the wash cycle.T:o select Soak, press the SOAK button once to select
Soak ON.
Note: Once the Soak is under way you can exit out at any time by pressing
the SOAK button. This does not apply to BULKY cycle. For BULKY cycle to exit
SOAK press ADVANCE.
Wash Advance
There may be times when you wish to use the rinse and spin or spin only
portions of the wash cycle,The Advance option allows you to fast forward
your cycle to the desired location, Pressthe AD\Z&NCEbutton repeatedly to
advance the cycle to the desired position, then press START.
Note: If you wish to change any of the wash options
while your AquaSmart
_ is running
please
press START/PAUSE then change the required option.
Customizing
the wash cycles
To customize a cyde
You can program your Aqu_Sm_rt
_ to remember
the wash options
you prefer for each wash
cycle. For instance, you may want to set the Regular cycle to a cold wash.
1
Press POWER.
2
Press the wash cycle button.
s
Select your wash options
(eg. cold wash).
4
Press and hold down the wash cycle button for 2 seconds, until you hear a beep. This will store
your customized
cycle for future washes.
To change your customized
wash cycle simply repeat the steps above. Note: You will be unable
to customize
a wash cycle to start at the rinse or spin stage.
i
i,i
Heavy
Delicate
Sheets
/ky
Easy Iron
Fig 18Cu tomizing the w(_sh cycle
Advertisement
Table of Contents
