Problem Solver - Fisher & Paykel DD602I Use & Care Manual

PROBLEM SOLVER
If the DishDrawer does not appear to be working properly, check this chart and
correct where possible. You are reminded that User lauhs are not covered by the
warranty. [fyou need any assistance, please call our Customer Care Center on
1 888 9 367 872 betore you call for service.
PROBLEM POSSIBLE CAUSE WHAT TO DO
DishDrawerwill not start Power supply not
connected
Connect the power supply.
The drawer not closed
properly
Ensuro the drawer is firmly
dosed.
Lock on
Remove the Lock function
by holding down the Lock
button until the red light
above the Lock disappears.
Start/Pause button not
pressed
Press Start/Pause button.
DishDrawer does not
drain
Drain hose bent or kinked
Filter plate / drain filk, r
blocked
Straighten the drain hose.
Clean the fiher plate and
drain fiher.
Water does not flow into Water iaucet turned off
the DishDrawer
Inlet hose bent or kinked
turn the water iaucet on.
Straighten the inlet hose.
Water marks on the dishes Insufficient rinse agent
Check if there is enough
rinse agent in the
dispenser.
Rinse agent setting too low Increase the rinse agent
setting.
DishDrawer overloaded
or incorrectly loaded
Ensure the dishes are not
nesting together.
Too much detergent
Decrease the alllOUnt of
detergent.
27