Advertisement
Available languages
Available languages
How to Use Spray Tips
The quick-connect on the nozzle extension allows you to
switch between four different quick connect spray tips. Spray
tips can be changed while pressure washer is running once
spray gun trigger lock is engaged. The spray tips vary the
spray pattern as shown below.
Foflow these instructions to changespray tips:
1.
Pull back collar on quick-connect and pull current spray
tip off. Store spray tips in holes provided in the handle.
WARHIHG
The high pressure stream of water that this
_
quipment produces can cut through skin and its
underlying tissues, leading to serious injury and
possible amputation.
• NEVER exchange spraytips withoutthe triggerlock on the
spraygun engaged.
• DONOTtwist spraytips whilespraying.
2.
Select desired spray tip:
•
For gentle rinse, select white 40° spray tip.
•
To scour surface, select yellow 15° or red 0° spray
tip.
•
To apply detergent, select black spray tip.
_;
Low Pressure
Black
Use to apply
detergent
How to Use the Turbo Nozzle
The turbo nozzle spins a 0° nozzle stream in a circular
pattern, providing an intense wide-spray pattern for scouring
large surface areas fast and efficient.
A turbo nozzle can easily cut through heavy oil and grease
stains on concrete, brick and plastic and strip paint from
various surfaces. DO NOT use the turbo nozzle on delicate
materials, especially wood. Always start the turbo nozzle at a
distance, gradually getting closer to the surface until you get
the cleaning force you want. Always keep the turbo nozzle in
a constant motion. NEVERdwell on a single spot. Pass over
stubborn stains repeatedly until they are gone using even
strokes.
WARNING
The high pressure stream of water that this
equipment produces can cut through skin and its
underlying tissues, leading to serious injury and
_
possible amputation.
The turbo nozzle produces an extremely high
pressure spray which is capableof removing
paint and cutting holes through surfaces if held
too close.
• Alwaysmakesurethesurfaceyouwill cleanwill not bedamaged
bythe high pressure spraybytestingin a hidden area.
To attach the turbo nozzleto the spray gun:
1. Pull back collar on quick-connect and pull current spray
tip off. Store spray tips in holder provided on the handle.
2. Pull back on collar, insert turbo nozzle and releasecollar.
Tug on turbo nozzle to make sure it is securely in place.
/;
40° White
High Pressure
ii
i
I
I
J
i
I
15° Yellow
0° Red
3.
Pull back on collar, insert new spray tip and release
collar. Tug on spray tip to make sure it is securely in
place.
Usage Tips
*
For most effective cleaning, keep spray tip from 8 to
24 inches (20 to 61 cm) away from cleaning surface.
*
If you get spray tip too close, especially using a high
pressure spray tip, you may damage surface being
cleaned.
*
DONOT get closer than 6 inches (15 cm) when cleaning
tires.
3. For most effective cleaning, keepturbo nozzlefrom 8 to
24 inches away from cleaning surface. If you get turbo
nozzle too close, you may damage cleaning surface.
NOTE:Detergentcannot be applied with the turbo nozzle.
Cleaningand Applying Detergent
CAUTION
Chemicals can cause bodily injury, and/or property
damage.
• NEVER usecausticliquid with pressure washer.
• UseONLYpressure washersafedetergents/soaps. Followall
manufacturers instructions.
TOapply detergent, fellow these steps:
1.
Pull back on collar, insertblack detergent nozzle and
releasecollar. Tug on nozzleto make sure it is securely
in place.
NOTE:Detergentcannot be applied with the high pressure
spray tips (White, Yellow, or Red).
2.
Prepare detergent solution as required by job.
12
Advertisement
