Download Print this page

Craftsman 580.752360 Operator's Manual page 11

3000 psi 2.8 gpm
Hide thumbs Also See for 580.752360:

Advertisement

Available languages

Available languages

WARHJHG
The high pressure stream of water that this
equipment produces can cut through skin and its
_
nderlying tissues, leading to serious injury and
3ossible amputation.
Spray gun traps high water pressure, even when
engine is stopped and water is disconnected,
which can cause injury.
• DO NOT allow CHILDRENto operate pressure washer.
• Keep high pressure hose connected to pump and spray gun
while system is pressurized.
• NEVERaim spray gun at people, animals, or plants.
• DO NOTsecure spray gun in open position.
• DO NOT leave spray gun unattended while machine is running.
• NEVERuse a spray gun which does not havea trigger lock or
trigger guard in place and in working order.
• Always be certain spray gun, nozzles and accessories are
correctly attached.
WARHIHG
Contact with muffler area can result in serious
burns.
._
Exhaust heat/gases can ignite combustibles,
structures or damage fuel tank causing a fire.
* DO NOTtouch hot parts and AVOID hot exhaust gases.
, Allow equipment to cool before touching.
, Keep at least 5 feet (152 cm) of clearance on all sides of
pressure washer including overhead.
, Code of Federal Regulation (CFR)Title 36 Parks, Forests, and
Public Property require equipment powered by an internal
combustion engine to have a spark arrester, maintained in
effective working order, complying to USDAForest service
standard 5100-1C or later revision, in the State of California a
spark arrester is required under section 4442 of the California
Public resources code. Other states may havesimilar laws.
How to Stop Your Pressure Washer
1.
Release spray gun trigger and let engine idle for two
minutes.
2.
Move throttle lever to "Slow" position, shown as a turtle.
WARHIHG
,_
Backfire, fire or engine damage could occur.
• DO NOT stop engine by moving choke leverto "Closed" position.
3.
Move engine switch to "Off" position.
4.
Move fuel valve lever to "Off" position.
5.
ALWAYS point spray gun in a safe direction, push red
button and squeezespray gun trigger to release retained
high water pressure.
IMPORTANT:Spray gun traps high water pressure, even
when engine is stopped and water is disconnected.
WARHIHG
The high pressure stream of water that this
equipment produces can cut through skin and its
_
nderlying tissues, leading to serious injury and
}ossible amputation.
Spray gun traps high water pressure, even when
engine is stopped and water is disconnected,
which can cause injury.
• Keephigh pressurehoseconnected to pumpand spraygun
whilesystemis pressurized.
• ALWAYS pointspraygun in safedirection,pressred button
andsqueeze spraygun trigger,to releasehigh pressure, e very
time youstop engine.
11

Advertisement

loading