Fisher & Paykel DS601V2I-87550 Use & Care Manual page 22

Auto Power
When tile Auto Power feature is on, it turns tile DishDrawer automatically to tile
Normal Operating Mode, whenever tile drawer is opened. I he light above tile Start/
Pause button is green and a series of beeps are emitted when tile DishDrawer is
opened.
When tile DishDrawer leaves tile factory, tile Auto Power feature is programmed to
occur, however this can be turned on or o11as desired.
_, E,/ter into tile Option Adjustment Mode as explained previously.
• Pressing tile Lock button will turn the Auto Power on or off.
• IIe, after pressing tile Lock button you hear a sequence of beeps then tile Auto
Power is on or ff you hear one single beep then tile Auto Power has been turned
off. Select tile setting you require.
• Press tile Power button to return to tile Normal Operating Mode.
When Auto Power is turned off, tile light above tile Start/Pause button does not light
tip when tile drawer is opened and there are no beeps. I o turn tile DishDrawer on,
press tile Power button or tile Start/Pause button to start tile dishwasher.
Note: II_tile mains power supply is turned off then tile Auto Power feature will
defau It to tile factory setting.
Water Pressu re
I he DishDrawer is programmed at tile factory to suit most water supply pressures.
However, a very low water pressure ( _<4 psi ) may result in a fault code occurring and
ff this happens then tile water pressure setting should be changed.
_, Enter into tile Option Adiustment Mode as explained above.
• Pressing tile Start/Pause button will change tile water pressure settings.
• II_after pressing tile Start/Pause button tile DishDrawer emits ol/e high sounding
beep then you have selected tile high or standard pressure setting (HP) but ff it
emits a low sounding beep then you have changed tile setting to low pressure
(LP). Select tile setting you require.
• Press tile Power button to return to tile Normal Operating Mode.
Waming:
Under no circumstances do we recommend you change your water pressure setting to
low pressure '_LP'_ ff you have high or standard water pressure. Failure to follow this
warning can result in damage to your DishDrawer or property.
2_