Fisher & Paykel DS601V2I-87550 Use & Care Manual page 20

Rinse Agent Dispenser
Rinse agent gives a streak free sparkling clean look
to glass and chinaware. It speeds Lip drying and
helps prevent metal from tarnishing.
We highly recommend that you regularly use liquid
rinse agent to give the best drying results. For best
drying results, periodically check tile rinse agent
dispenser to see ff it needs filling and fiJ[ when
empty.
I he rinse agent dispenser is on tile inside of tile
drawer, located underneath tile detergent dispenser.
I he dispenser holds approximately 1.7 I]uid oz of
rinse agent.
Figure 19 - Filling the
Rinse Agent Dispenser
To Load the Rinse Agent Dispenser
_, I urn tile plug counter clockwise, about one
eighth of a turn and remove.
_, Pour tile rinse agent into tile circular opening.
_, Iake care not to spill rinse agent into tile drawer.
• Wipe any overl]ow to prevent excess foam ing.
_, tit tile plug back into the original position.
Rinse
o
Agent Indicator Light
II_tile rinse agent indicator light is red, then there is little or no rinse agent left in
tile dispenser. Rinse agent should be added into tile dispenser.
II_tile rinse agent window is black, there is enough rinse agent for tile wash.
How Much Rinse Agent to Use
I he regulator may need adjusting to suit your water conditions. Ihe lowest
setting is '1' and tile highest is '5' (refer to Option Adjustment Mode).
_, II your dishes have white streaks, or there is excessive foam in tile
DishDrawer, reduce the setting.
_, I1 your dishes have water marks, or il I]ecks are left on glasses after drying,
increase tile setting.
19