Advertisement
6
Replacement
of drive belt
1.
Dismantle the cutting unit as described previously.
2. 'Pull apart the contact for the cable to the electrical connec-
tion (1).
3.
Dismantle the motion restrainer for the clutch (2).
4.
Engage the parking brake and work off the belt upwards
from the pulley (3), the clutch pulley (4).
5.
Work off the belt upwards from the pulley at the rear axle
(5).
6.
Take off the belt from the engine pulley.
(_
Assemble in the reverse order to dismantling. Check that the
belt lies inside all the belt guides. Use original belts only when
replacing!
76
Advertisement
