Advertisement
5
_)
To convert mower
Converting to mulching or rear discharging will require the
purchase of these accessories.)
To mulching
•
Place deck into the high cut position.
•
Remove bagger or optional roar discharge deflector.
•
Unhook the two (2) straps and remove discharge chute
•
Insert plug and handle assembly through back plate
and onto the mower deck chute adaptor.
•
Retain the plug assembly by connecting the two straps
over the handle and hook in!o the holes provided.
•
Replace bagger or optional roar discharge deflector to
allow mower to operate.
You are now roady to begin mulching.
To rear discharging
Place deck into the high cut posit_on.
Remove bagger and mulching plug (if installed).
Install discharge chute through opening in backplate
and slide over deck adaptor.
Attach the chute by hooking the two straps into the
holes in the flange of the chute.
Install the discharge deflector to the backplate by
screwing the four (4) wing screws into the threaded
inserts iocated in the backplate.
Tighten the wing screws securely.
Tobagging
Place deck into the high cut position.
Remove the roar discharge deflector or mulching plug.
Insert the discharge chute into the opening in the
backplate and onto the mower deck adaptor.
Attach the chute to the tractor by hooking the two straps
to the flange of the chute.
install bagger into tractor.
54
Advertisement
