Unpacking And Checking Contents; Tools Needed For Assembly - Craftsman 137.219090 Owner's Manual

UNPACKING AND CHECKING
CONTE NTS
TOOLS NEEDED FOR ASSEMBLY
Hammer and block of wood
o Combination square
If any part is missing or damaged dO nol plug the ddll Screwdrivers
press in until the missing or damaged parl is replace&
and assemb|y is complete_
Carefully unpack the ddH press ann all its paris, and
compare against the illustration h ÷low.
To protect the dr#! press trom moisture, a protectwe
coating has been applied to the machined surfaces.
Remove this coating with a soft cloth moiste;ned with
kerosene or WD-40.
To avoid tire or toxic reaction, never use gasoline,
naphtha_ ace[one, lacquer thinner or s_mHar high y
volatfle solvents T_ clean the drilt press=
BAse
Column
Bo_s (3}
J
Fence assembly
Read/motor assembbJ
Triangle '(hobs (2)
Washers f4_
Table
Feed handles {3)