Carton Contents; Accessories And Attachments; Available Accessories; Unpacking And Checking - Craftsman 137.229130 Owner's Manual

AVAILABLE ACCESSORnES
Visit your Sears Hardware Department or see the Sears
Power and Hand Tools Catalog for the following accessories:
o Drill bits
o Hold-Down and Guide
• Drill Press Vises
- Clamping Kit
To avoid personal injury:
o Use only accessories recommended for this drill press.
o Follow instructions that accompany accessories. Use
of improper accessories may cause hazards.
o Use only accessories designed for this drill press to
avoid injury from thrown broken parts or workpieces.
Do not use any accessory unless you have completely
read the instruction or owner's manual for that
accessor_
UNPACKING AND CHECKING
CONTENTS
Carefully unpack the drill press and all its parts, and
compare against the list below.
To protect the drill press from moisture, a protective coating
has been applied to the machined surfaces. Remove this
coating with a soft cloth moistened with kerosene or WD-40.
To avoid personal injury:
• If any part is missing or damaged, do not plug the drill
press in until the missing or damaged part is replaced,
and assembly is complete.
• To avoid fire or toxic reaction, never use gasoline,
naphtha, acetone, lacquer thinner or similar highly
volatile solvents to clean the drill press.
ITEM DESCRIPTION QUANTITY
A. Head assembly I
B. Table 1
C, Base 1
D, Column assembly 1
E, Speed control knob and collar 1
Loose parts bag:
R Lock handle 1
G. Crank handle 1
H, Hex bolts 4
I, Fence assembly 1
J. Triangle knobs 2
K. T-Block 2
L. Washer 2
M. Hex wrenches 2
N. Wedge 1
O. Arbor 1
Box:
R Chuck key
Q. Chuck
1
1
UNPACKING YOUR DR LL PRESS
F
A
G
C
J K
M N 0 P Q D