Advertisement
Available languages
Available languages
TO RETIGHTEN
A LOOSE
CHUCK
(Figs.
16 and 16a)
The chuck may become
toose on the spindle
and develop a wobble
Also, the chuck
screw may become
loose, causing
tile chuck
Jaws to bind and pro#ant them from closing
TO lighten:
1. Lock the trigger switch by placing Ihe
Forward t Reverse Selector
Switch with Power
Lock-Oil in the cenler, or OFF position,,
2 Open lhe chuck jaws,,
3 insert a 5116 in,, or larger hex key tnlo the
chuck and tighten the chuck jaws securely
Tap the hex key sharply
wllh a mallet
in a clockwise
direction
.This will tighten
the chuck on lhe spindle.
4 Open the chuck jaws and remove the hex key,
5 Tighten the chuck screw, Nolo that lhe chuck
screw has left hand threads and
counlerclockwise
direction
tightens instead
of loosens.,
Fig.16
WARNING:
The use of attachments
or accessories
that ere not
t
recommended
for this tool might be dangerous
and could result in sedous
tnJury_
Sears and olher Craltsman '_ outlets offer a large selection
of Craftsman
drit;/driver
accessories
designed for el; your drill !driving epplicalions,
You may purchase
kits and sels specilicalty
for drilling and drivtng, twist drtfl bit sets,
a varietyof power drill l ddvlng bit sets, spade bit sets, carbide-tippedmasonry drtll bit sets,
exlra long bits° magnetic bi! holders and more,
Vist! your local Sears store or other Craftsman outfets or shop seam,,ccm/craftsman
for all
of the accessories
for your drill/driver.,
24
Advertisement
